Catalog Home » Werkstatt Formulas » Details »

  View Cart




Description: Water-based protective dressing for vinyl, rubber, plastic, and leather. Blocks UV rays, renews color, and dries to a natural sheen.

Packaging: 500 mL with Trigger Sprayer

Price: 12.95

Quantity:




- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


CLEANS interior and exterior vinyl, plastic, coated leather, rubber, and synthetic trim without harmful solvents.

RENEWS the original color of automotive trim while drying completely for a non-greasy, natural satin sheen.

PROTECTS against fading, drying, and cracking caused by ultraviolet radiation, when used regularly.


While the exterior of your vehicle is your show to the world, the interior is what you will most directly experience. JEFFS Satin Prot, produced in Germany, is a unique formulation that renews all rubber and plastic surfaces, including vinyl and coated leather, so that the inside of your car will be as well maintained and protected as the outside. JEFFS Satin Prot gently cleans the surface and lays down a layer of protection against UV damage while restoring the original, natural appearance and color of the surface.

Where other products coat the surface with an artificial shine, JEFFS uses a protective base that dries completely to the touch with a satin finish. While additional layers will build up the protective properties, at no point will the finish turn thick, oily, or gummy. And because the finish dries completely, it will not attract excessive dust or evaporate a filmy residue onto the glass like some other products. In short, JEFFS Satin Prot renews the color, protects against cracking and fading caused by UV damage, and dries to a natural sheen. Your interior will once again look factory original.

JEFFS Satin Prot can also be applied to tires, for long-lasting, natural-looking protection.

For best results, the surfaces should first be thoroughly cleaned of the residue left from previous dressings with a suitable all-purpose cleanser.

Made in Germany

500 mL / 16.9 oz


Directions

1. PREPARE: For heavily soiled surfaces, first pre-clean with an appropriate cleanser.

2. APPLY: With suitable applicator, rub into dry surfaces.

3. BUFF: After 10-20 minutes, wipe away any excess.

4. REPEAT: If desired, apply additional coats until best result is obtained. Use regularly for maximum UV protection.



Quantity: